ESS CCM Communication Driver

ESS CCM communication driver is the driver to communicate with generator controller CCM model.

1. Read settings

<Figure 1> is read setting example of  ESS CCM communication driver. 

<Figure 1>  Read setting example of  ESS CCM communication driver

Device part of  <Figure 1> input Com Port(COM1), Baud Rate(9600), Parity Bit(0), Data Bit(8), Stop Bit(1) respectively, according to setting of controller.

ESS CCM communication driver’s read schedule

Read schedule setting parameters are as follows:

1) Station – When using G3600 Engine = always 13. Other = Unit number.

2) Read Command – Parameter number = 0040, 0041, 0044, 0054, F013, ..... ( Refer to <Table 1> )

3) Read Start Address – Don't care.

4) Save start address for Communication Server – Saving start address of Communication Server.

5) Read Size – Fixed to 1.

Read schedule example) 

READ, 13, 0040, 0, 0, 1,

READ, 13, 0041, 0, 1, 1,

READ, 13, 0044, 0, 2, 1,

READ, 13, F013, 0, 3, 1,

<Table 1> is paraneter number and contents of ESS CCM controller.

2. Writing settings

ESS CCM  communication driver don't support 'Writting settings'.